1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
|
#include <avr/interrupt.h>
#include <avr/io.h>
#include <stdint.h>
#include <util/delay.h>
#include "display.h"
// "_gfedcba"
// Reversed because a-g is mapped to pa0-6. (pa7 is decimal)
// Complemented because display is common anode
const uint32_t digit_masks[] = {
0b01000000, 0b01111001, 0b00100100, 0b00110000, 0b00011001,
0b00010010, 0b00000010, 0b01111000, 0b00000000, 0b00010000,
};
void setup_display() {
TIMSK1 = 0;
// Set prescaler (Timer clock = F_CPU / 64)
// For 32768Hz -> 32768/64 = 512Hz
TCCR1B = (1 << CS11) | (1 << CS10) | (1 << WGM12) | (1 << WGM13);
TCCR1A = (1 << WGM11) | (1 << WGM10);
TCNT1 = 0; // Start counting from 0
OCR1A = 1; // 0-1 = 2 counts before timer interrupt (512/2 = 256Hz)
OCR1B = 0;
TIFR1 = (1 << OCF1A) | (1 << OCF1B) | (1 << TOV1); // Clear interrupt flags
TIMSK1 = (1 << OCIE1A); // Enable timer overflow interrupt
// Draw startup state
DDRA |= 0b11111111;
DDRB |= 0b11111111;
PORTA = (1 << PA7);
PORTB = (1 << PB2);
}
void write_digit(uint8_t digit) {
if (digit > 9 || digit < 0)
return;
PORTA = digit_masks[digit];
}
void write_time(uint16_t hour, uint16_t minute, uint8_t mask) {
uint8_t minute_digit1 = minute % 10;
uint8_t minute_digit2 = (minute / 10) % 10;
// unsigned short hour_digit1 = hour % 10;
// unsigned short hour_digit2 = (hour / 10) % 10;
// _delay_ms(4);
// Reset digit control pins
PORTA &= ~(1 << PA7); // minute digit 1
PORTB &= ~(1 << PB2); // minute digit 2
// _delay_ms(4);
// cli();
if (mask & 0b0001 || mask & 0b0100) {
#ifdef STUBBED
printf(":: %d\n", minute_digit1);
fflush(stdout);
#endif
write_digit(minute_digit1);
PORTA |= (1 << PA7);
}
if (mask & 0b0010 || mask & 0b1000) {
#ifdef STUBBED
printf(":: %d\n", minute_digit2);
fflush(stdout);
#endif
write_digit(minute_digit2);
PORTB |= (1 << PB2);
}
// sei();
}
|
